Hodgson Sealants Foilband Flashing Tape
- Suitable For: oversealning or repairing joints
- Area of use: INT & EXT
- Volume: 10m x 100mm x 1.5mm 10m x 150mm x 1.5mm 10m x 200mm x 1.5mm
- Type: seapling tape
- Colour: 2 colours
- Brand: Hodgson Sealants
- Manufactuer: Hodgson Sealants
Data Sheets
Hodgson Sealants Foilband is a preformed strip sealant made from synthetic rubber and affixed with a secure foil backing.
Key Features
- Excellent adherence to a diverse array of substrates.
- This product demonstrates exceptional conformability.
- The foil exhibits impressive resistance to tearing and puncturing.
- Maintains flexibility throughout its operational lifespan.
- Shows good resistance to UV exposure.
- Simple and precise application with minimal wastage and mess.
For more in our range of sealants, please click here. For application guns and tool, please click here.
For more information on Hodgson Sealants and their other products, you can visit their website here.
Hodgson Sealants Foilband is:
- Suitable for application as a flashing tape, commonly used in conservatory construction.
- Effective for sealing, over-sealing, or repairing joints in gutters and downpipes.
- Ideal for sealing over T-bars in glazing and conservatories.
- Well-suited for temporary remedial tasks, including the sealing of leaking components.
APPLICATION
Surface Preparation: Prior to application, ensure all surfaces are clean, dry, and devoid of frost, grease, and loose materials. For contaminated substrates, Hodgson recommends the use of propan-2-ol (IPA) for cleaning, allowing it to dry before applying the sealant strip. When applying the tape on porous or friable surfaces, it’s advised to treat the surface with an appropriate primer, such as an exterior-grade PVA, to seal and stabilize it.
Application: To prevent creasing of the foil, separate the foil and sealant from the backing paper while unwinding them from the roll. After application, use a roller to secure good adhesion to the substrate. Minimize seams in the flashing where possible. In cases where joints are necessary, they should overlap by a minimum of 120mm, with the uppermost piece overlapping on top of the lower strip, enabling water to run freely over the front surface of the flashing. When applying the tape on textured surfaces like pebble dash or rough brick, it’s recommended to apply a bead of Silfix® U9 Low Modulus Silicone on the top edge of the foil to prevent water from penetrating behind the strip.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related products
-
£4.84 inc. VAT
£4.03 ex. VATEverbuild AC50 is a permanently flexible, high strength acoustic sealant and adhesive specially formulated for sealing and bonding plasterboard and other kraft lined insulation boards to conventional substrates. Advantages - Everbuild AC50 is permanently flexible/high grab. - Adheres to most surfaces. - Mould resistant. - Non-flammable - Over paintable. - Easy cleanup. Please note, this is a non-stock item & extended lead times are advised To shop our Everbuild range, please click here. For further information, please visit the Everbuild website here. -
£58.27 inc. VAT
£48.56 ex. VATillbruck CT600 is a high strength spray contact adhesive that is ideal for quick & straightforward bonding of many common materials. illbruck CT600 is ideal for quick and straightforward bonding of most common materials, including cardboard, fibrous insulation materials, plastics, canvas, cork, rubber, fabrics and foam, either to themselves or onto brickwork, concrete, stone and plaster. - A robust contact adhesive in a convenient easy-to-use 500 ml canister - Adjustable nozzle that allows precise control of the spray pattern to suit any particular job - Superior covera -
From: £14.38 inc. VAT
£11.98 ex. VATUltracolor Plus forms a mortar with the following characteristics: - water-repellent and droplet-effect - colours resistant to ultra-violet rays and atmospheric agents - ready for light foot traffic after a short period of time - After that is shrinkage compensated, therefore free from cracks Therefore it has optimum resistance to abrasion, compression and flexural strength, even after freeze/thaw cycles, and therefore optimum durability. In addition, it has good resistance to acids with pH > 3. To calculate quantities, please use the Mapei grout calculator here -
From: £20.76 inc. VAT
£17.30 ex. VATDowsil 895 is a neutral curing silicone sealant designed for structural bonding of metal, glass and other building materials. DC 895 can also be used for adhesive applications. The neutral cure cures at room temperature, via exposure to water vapour. For all other Dow Corning products on our website, please click here. For any further information, you may need, please visit the Geocel website here. For alternative products please see below, options like CT1 are available.
From:
From:
-
From:£6.82£1.19 inc. VAT£5.68£0.99 ex. VATHodgsons Sealants Silfix U7 represents a high modulus silicone sealant and adhesive engineered with an acetoxy curing mechanism, tailored to meet the exacting standards of professional users. It is ideally suited for a wide range of applications, including those within the realms of sanitation and plumbing, across industrial, commercial, and domestic settings. This exceptional product is distinguished by its remarkable tooling properties and offers the vital characteristic of exceptional elasticity, ensuring resistance to shrinkage and cracking. Its versatility extends to strong adhe -
From:£6.82£1.19 inc. VAT£5.68£0.99 ex. VAT
From:£6.82£1.19 inc. VAT£5.68£0.99 ex. VATHodgson Sealants Silfix U7N is a specialized silicone sealant and adhesive designed for professional users, particularly in sanitary and plumbing applications. Here are some key features and applications of Silfix U7N: Low modulus and alkoxy cure: Silfix U7N is a low modulus silicone, which means it has high flexibility and can accommodate movement without cracking. The alkoxy cure mechanism releases alcohol during curing, resulting in a neutral cure silicone sealant. Exceptional tooling properties: The sealant is formulated with properties that make it easy to tool and shap
Reviews
There are no reviews yet.