Mapei Latex Plus – Various Sizes
- Suitable For: a latex admixture for use with NIVORAPID and PLANIPATCH.
- Area of use: INT
- Volume: 1.5KG, 3KG, 6KG
- Container Type: bottle
- Type: admixture
- Brand: Mapei
- Manufactuer: Mapei
- Box Size: 1
Latex Plus is a latex admixture for use with NIVORAPID and PLANIPATCH. When mixed together it provides fast-setting levelling/smoothing compounds, with high flexibility for interior surfaces.
CHARACTERISTICS
Latex Plus is a water dispersion of a highly flexible polymer with low viscosity. Mix with Keraquick S1 or Nivorapid in order to improve their deformability, thus improving their application and performance characteristics.
For more information about Mapei and their products, please visit their website here.
For our full Mapei range, click here. For more in our Accelerators & Admixtures range, click here.
Please be aware that this is a non stock item and lead times may vary.
• As an admixture for Keraquick S1 to ensure a high performance, fast setting, slip resistant and highly deformable adhesive. For ceramic tiles and stone.
• As an admixture for Nivorapid to gain an ultra-fast cementitious levelling compound, improving deformability and bonding strength.
APPLICATION
Preparing the substrate
Substrates must be flat, strong, free from dirt and debris and sufficiently dry. Damp substrates could slow down the setting process. Cementitious surfaces must not continue to shrink once the tiles are installed, renders should therefore be cured for at least 2 weeks. Cementitious screeds must have an totaL cure of at least 3-4 weeks. Surfaces that are too hot due to exposure should be dampened down with water. Gypsum substrates and screeds must be perfectly dry, sufficiently hard and dust free. They must be treated with either Primer G or Eco Prim T.
Preparing the mix
Pour the powder into the liquid, mixing with at low speed with an agitator. Mix until a lump-free paste is achieved. Allow the mix stand for a few minutes before briefly mixing again, then apply.
Applying the mix
Spread the mix on the surface with a notched trowel and quickly set the tiles. Press firmly to ensure the adhesive transfers. Always be careful to stay within the adhesives working time. In certain ambient conditions (high temperatures, etc) the working time may be shorter than usual.
LIMITATIONS
• Do not use in exterior works.
• Do not use on surfaces subject to damp.
• Do not use directly on anhydrite surfaces.
• Do not use Nivorapid mixed with Latex Plus underneath parquet or glued wood flooring as a levelling compound.
• When used for resilients, watch out for shadowing. If possible, use Latex Plus diluted with water.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
From:£10.10£7.66 inc. VAT£8.42£6.38 ex. VATKeracolor Flex is an improved, cementitious grout with water repellent properties and high abrasion resistance. Keracolor Flex is a blend of specially selected hydraulic binders with fine graded aggregates, polymers, additives and colourants. High-quality hydrophobic additives enhance the grout’s technical performance imparting water repellent properties to the surface. This reduces dirt pickup and increases the grout’s durability and longevity. When mixed and applied correctly to the joints, the following properties are obtained: • water repellent surfaces; • joint w -
From:£36.77£27.84 inc. VAT£30.64£23.20 ex. VATKerapoxy CQ is certified by the University of Modena (Italy) according to ISO 22196:2007 standards as a grouting mortar protected against the formation and proliferation of micro-organisms. TECHNICAL CHARACTERISTICS Kerapoxy CQ is a two-component, epoxy resin-based product with silica sand and other special components. It has excellent resistance to acids and is very easy to clean. Kerapoxy CQ has a bacteriostatic agent, preventing the proliferation of bacteria and forming mould on the surfaces of grouts, making tiled surfaces hygienic and safe, thanks to the innovative BioBlock technolo -
From:£26.00£13.20 inc. VAT£21.67£11.00 ex. VATUltracolor Plus forms a mortar with the following characteristics: - water-repellent and droplet-effect - colours resistant to ultra-violet rays and atmospheric agents - ready for light foot traffic after a short period of time - After that is shrinkage compensated, therefore free from cracks Therefore it has optimum resistance to abrasion, compression and flexural strength, even after freeze/thaw cycles, and therefore optimum durability. In addition, it has good resistance to acids with pH > 3. To calculate quantities, please use the Mapei grout calculator here -
£104.40 inc. VAT
£87.00 ex. VATMapeflex Firestop 1200 °C is a one-component, asbestos-free, quick-setting, rigid, silicate refractory fire resistant sealing grout, high temperatures and fumes. Ideal for making rigid seals in chimneys, ovens, radiators, barbecues, flues and fire-break walls. Also suitable for pointing or for installation layers on refractory bricks when building or carrying out maintenance work on elements in continuous, permanent contact with flames or heat up to +1200°C, with temporary peak temperatures up to +1600°C. TECHNICAL CHARACTERISTICS Mapeflex Firestop 1200°C is a soft paste in em
Reviews
There are no reviews yet.