Soudal Yellow – Parquet – Hybrid Polymer Adhesive
- Suitable For: use on porous and non-porous substrates such as mosaic, anhydrite, concrete, etc.
- Area of use: INT
- Application Method: trowel
- Time to full cure: 24 hours
- Volume: 1kg, 7kg, 15kg
- Container Type: tub
- Type: adhesive
- Colour: light brown
- Brand: Soudal
- Manufactuer: Soudal
- Box Size: 1
Soudal Parquet Hybrid Polymer is a universally applicable water-free polymer for gluing multi-layered and solid parquet floor with tongue and groove. Also suitable for gluing exotic woods.
Properties
– Flexible
– EC-1 Plus label: very low emission
– 1-component system ready for use
– Solvent free
– Contains no water
– Free of isocyanate
– Easy application
– Suitable for underfloor heating
Substrates
Nature: SMX Parquet adhesive should be applied on a rigid, clean, permanently dry, dust and grease free surface which do not contain any loose parts, paint, wax, oil or other contaminants. Irregularities such as remaining concrete levelling, old adhesives may adversely affect adhesion. These need preferably to be removed mechanically for example by sanding or blasting. The top layer of anhydrite subfloors has to be removed.
Before installation of the parquet, the substrate should be checked to ensure it is suitable. Check the moisture content throughout the entire thickness of the substrate with a carbide or electric hygrometer. Note that an electric hygrometer only gives indicative values. The moisture content must correspond the recommendation of the floor manufacturer (generally max. 2% for sand cement substrates and max. 0,5% for anhydrite, measured with a carbide hygrometer. For substrates with underfloor heating the values are resp. max. 1,5% and 0,3%). We recommend a preliminary adhesion test on any substrate.
Please note, this is a non-stock item & extended lead times are advised
For more in our range of adhesives, please click here, or for more products from Soudal, click here.
Alternatively, you can visit Soudals website by clicking here.
Parquet Adhesive is suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (large particle size chipboard), including floors with underfloor heating and cooling.
APPLICATION
SMX Parquet adhesive should be acclimatised to room temperature before installation. Apply the adhesive by means of Soudal notched trowel B11 to the surface. Do not apply more to the surface than can be covered with parquet within 30 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer. A minimum of 80% contact coverage is required to ensure the adhesion of ther parquet. If necessary load the parquet with weight. Wait at least 24 hours before sanding and finishing the parquet.
Cleaning: SMX Parquet adhesive can be removed before curing from tools and material with Soudal Adhesive Cleaner 90A, Swipex or white spirit. Cured SMX Parquet adhesive can only be removed mechanically.
LIMITATIONS
– Minimum temperature of the substrate should be at least 15°C.
– Do not apply the adhesive when the relative humidity is above 75%.
– Never install flooring on a substrate which contains too much moisture or on substrates with a higher humidity value than recommended by the wood supplier.
– Never install wood which is too dry (<7% humidity). It can expand at higher humidity and cause damage.
– Do not install if the walls and ceilings of the area are not dry (e.g. after plastering or painting etc.)
– Do not dilute the adhesive.
– Never apply on a substrate which is not protected against rising damp. If necessary apply a moisture sealer such as Soudal EPR-31P.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
From: £4.86 inc. VAT
£4.05 ex. VAT -
From: £0.00 inc. VAT
£0.00 ex. VAT -
-
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.