Soudal Yellow – Parquet Waterbased Adhesive
- Suitable For: indoor bonding of many types of wooden floors
- Area of use: INT
- Application Method: trowel
- Time to full cure: 24 hours
- Volume: 1KG, 5KG, 15KG
- Container Type: tub
- Type: adhesive
- Colour: light oak
- Brand: Soudal
- Manufactuer: Soudal
- Box Size: 1
Soudal Parquet Waterbased Adhesive is a ready to use solvent-free dispersion parquet adhesive. Suitable for bonding most common types of parquet onto highly absorbent substrates and also tapis floors on wooden subfloors.
Properties
– Easy to tool
– Professional quality
– High adhesive strength
– High end strength (shear strength according EN14293)
Substrates
Substrates: porous substrates like concrete and wood
Nature: 68A Parquet Adhesive should be applied on a rigid, clean, permanently dry, dust and grease free surface which do not contain any loose parts, paint, wax, oil or other contaminants. Irregularities such as remaining concrete levelling, old adhesives may adversely affect adhesion. These need preferably to be removed mechanically for example by sanding or blasting.
Surface preparation: No pre-treatment required. Before installation of the parquet, the substrate should be checked to ensure it is suitable. Check the moisture content throughout the entire thickness of the substrate with a carbide or electric hygrometer. Note that an electric hygrometer only gives indicative values. The moisture content must correspond the recommendation of the floor manufacturer (generally max. 2% for sand cement substrates and max. 0,5% for anhydrite, measured with a
carbide hygrometer. For substrates with underfloorheating the values are resp. max. 1,5% and 0,3%). Do not use 68A Parquet Adhesive on substrates, which contain
anhydrite or magnesium. Use Soudal MS-30P for these substrates. 68A Parquet Adhesive should be applied to an even, dry, clean and smooth substrate, which is also free from paint, wax, oil, irregularities and cracks.
We recommend a preliminary adhesion test on any substrate.
For more in our range of adhesives, please click here, or for more products from Soudal, click here.
Alternatively, you can visit Soudals website by clicking here.
Parquet Waterbased Adhesive is suitable for indoor bonding of many types of wooden floors such as mosaic, wood or laminate parquet (up to max. 250 x 50 mm), tapis 6-8 mm (in combination with nails), multilayer or pre-finished parquet and laminates. It is also ideal for indoor use on highly absorbent subfloors of wood, chipboard or OSB Board (large particle size chipboard) in combination with nails.
APPLICATION
68A Parquet Adhesive should be acclimatised to room temperature before installation. Apply the adhesive by means of SOUDAL notched trowel N° 3 to the surface. Do not apply more to the surface than can be covered with parquet within 30 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer. A minimum of 80% contact coverage is required to ensure the adhesion of the parquet. If necessary load the parquet with weight. When bonding tapis onto a wooden subfloor the parquet must also be nailed.
Wait at least 48 hours before sanding and finishing the parquet. In case of bonded and nailed tapis, wait at least 24 hours.
Cleaning: Before curing, 68A Parquet Adhesive can be removed with water from substrates and tools. Cured 68A Parquet Adhesive can only be removed mechanically.
LIMITATIONS
– Never apply on a substrate which is not protected against rising damp. If necessary apply a moisture sealer such as Soudal EPR-31P.
– Do not apply at temperatures below 15° or above 25°C.
– Minimum temperature of the substrate should be at least 15°C.
– Do not apply the adhesive when the relative humidity is above 75%.
– Never install flooring on a substrate which contains too much moisture or on substrates with a higher humidity value than recommended by the wood supplier.
– Never install wood which is too dry (<7% humidity). It can expand at higher humidity and cause damage.
– Do not install if the walls and ceilings of the area are not dry (e.g. after plastering or painting etc.)
– Do not dilute the adhesive.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.