Search results: “mapei” – Page 4
-
£298.71 ex. VATMapei Elastocolor is a protective and decorative elastic paint based on acrylic resins in water dispersion. It is used to protect concrete and cement surfaces from aggressive agents in the atmosphere. Once dried, Elastocolor forms a very elastic film that's impermeable to water but still permeable to vapour. At the same time it gives the treated structure a nice, aesthetic appearance. Due to its elastic characteristics, Elastocolor protects and waterproofs concrete structures and renders that have hair-line cracks present. It forms a bridge over the cracks creating a strong and -
Rated 5.00 out of 5£8.80 ex. VATKeracolor Flex is an improved, cementitious grout with water repellent properties and high abrasion resistance. Keracolor Flex is a blend of specially selected hydraulic binders with fine graded aggregates, polymers, additives and colourants. High-quality hydrophobic additives enhance the grout’s technical performance imparting water repellent properties to the surface. This reduces dirt pickup and increases the grout’s durability and longevity. When mixed and applied correctly to the joints, the following properties are obtained: • water repellent surfaces; • joint w -
£9.23 - £42.23 ex. VATMapei Waterproof Fix & Grout is a white, mould resistant, ready mixed adhesive and grout specifically for walls. For use in wet and dry areas. Suitable for both ceramic tiles and porcelain. CHARACTERISTICS Waterproof Fix & Grout is an aqueous dispersion based adhesive containing mould resistant BioBlock Technology. It is a viscous paste that can be trowelled easily on vertical surfaces. Once positioned, the tiles remain in place due to its excellent grab and slip resistant properties. It sets as the water it contains evaporates, forming an extremely strong bond -
£23.58 - £43.30 ex. VATMapegum WPS is a liquid waterproofing membrane for interior surfaces. Not suitable for continual immersion in water or areas that are subject to rising damp. Mapegum WPS is a ready-to-use, single component, solvent-free, grey coloured paste, with a base of synthetic resins in water dispersion. Mapegum WPS has a thixotropic consistency. This makes it easy to apply on all surfaces, especially those that are horizontal, sloping or vertical. After the quick evaporation of the water content, Mapegum WPS forms a flexible membrane which is non sticky, and strong enough to withstand light -
£4.49 - £13.48 ex. VATMapegrip D1 is a ready mixed adhesive paste for internal wall tiling for most ceramic tiles and mosaics. It has a non-slip quality with high initial grab, and an extended open time. Suitable for domestic kitchens, bathrooms and showers. Not suitable for commercial use. CHARACTERISTICS Mapegrip D1 is an adhesive in water dispersion on synthetic resins, selective graded minerals and various additives. Mapegrip D1 is a ready-to-use paste that is easily applied with a trowell, with good high initial grab. It's thixotropic properties make it perfect for installing wall tiles without -
£10.64 - £30.30 ex. VATLatex Plus is a latex admixture for use with NIVORAPID and PLANIPATCH. When mixed together it provides fast-setting levelling/smoothing compounds, with high flexibility for interior surfaces. CHARACTERISTICS Latex Plus is a water dispersion of a highly flexible polymer with low viscosity. Mix with Keraquick S1 or Nivorapid in order to improve their deformability, thus improving their application and performance characteristics. For more information about Mapei and their products, please visit their website here. For our full Mapei range, click here. F -
£14.46 ex. VATKeraquick Ultrafast S1 is a cement based ultra rapid setting adhesive for interior and exterior use, specifically when installing porcelain, ceramic or dark coloured non moisture sensitive natural stone materials to floors and walls. CHARACERISTICS Keraquick Ultrafast S1 is a powder mixture composed of special cements, selectively graded aggregates, resins and setting accelerators which create a high bond strength after only 60 minutes. For this reason, floor installations can be completed quickly and walked on after 12 hours. When hardened, Keraquick Ultrafast S1 is fr -
£31.34 - £33.74 ex. VATKeraquick XL Fibrelite is a fibre reinforced high yield, cement based, rapid setting, adhesive for both interior and exterior use. Suitable for installing porcelain, ceramic and natural stone materials. Suitable for fixing tiles up to 1500 x 1500mm. CHARACTERISTICS Keraquick XL Fibrelite is a powder composed of a special mix of cements that are comprised of selectively graded aggregates, synthetic resins, fibres and setting accelerators. These together, develop a high bond strength after only 90 minutes from setting. This enables floor installations to be completed quickly as the -
£40.68 - £74.22 ex. VATKeralastic T is a high performance, two-component, polyurethane adhesive for the installation of ceramic, porcelain, natural and agglomerate stone tiles & mosaics on interior and exterior walls and floors. Suitable for the interior and exterior bonding of wall and floor ceramic tiles, as well as stone material mosaics, etc. Other substrates include; • screeds, renders, concrete, asphalt, wood, metal, PVC, reinforced polyester, fibre-cement, gypsum, gypsum board, gypsum panels, etc. CHARACTERISTICS Keralastic T is a two-component, solvent and water free adhesives that ar -
£41.44 - £75.65 ex. VATKeralastic is a high performance, two-component, polyurethane adhesive for the installation of ceramic, porcelain, natural and agglomerate stone tiles & mosaics on interior and exterior walls and floors. Suitable for the interior and exterior bonding of wall and floor ceramic tiles, as well as stone material mosaics, etc. Other substrates include; • screeds, renders, concrete, asphalt, wood, metal, PVC, reinforced polyester, fibre-cement, gypsum, gypsum board, gypsum panels, etc. CHARACTERISTICS Keralastic is a two-component, solvent and water free adhesives that are bo -
Rated 5.00 out of 5£6.25 - £19.80 ex. VATFugolastic main purpose is as a substitute for water to mix the cement based grouts in the Keracolor range. This helps to improve the grout adhesion and mechanical strength, and to reduce the porosity and absorption. CHARACTERISTICS Fugolastic is a water dispersion of synthetic polymers, that when mixed with cement based products for grouting ceramic tiles, enhances them with the following properties: • Improved compactness and greater abrasion resistance. • Optimum hydration of the cement based binder, and improved adhesion to the edge of tiles. • Less poros -
Rated 5.00 out of 5£34.97 - £62.93 ex. VATMapei Eco Prim Grip is a multi-purpose, ready to use primer for floors and walls both internally and externally. It may help to improve the bond of all types of cement, gypsum and lime-based plasters, and on substrates made from concrete, brickwork, vibro-compressed concrete blocks, lightweight blocks, gypsum, etc. It is also suitable for improving the adhesive bond for ceramics, for smoothing and levelling compounds on non absorbent surfaces such as ceramics, terrazzo and natural stone flooring. CHARACTERISTICS A solvent-free primer composed of synthetic resin, in wa
