Bond-It Steri-Grout Wall & Floor Tile Grout 3kg – Box of 5
- Suitable For: use in areas of limited movement/ vibration, so ideal for use over timber ply-boards and heated subfloors.
- Area of use: INT & EXT
- Time to full cure: 12-24 hours
- Volume: 3kg
- Container Type: bag
- Type: grout
- Colour: 6 colours
- Brand: Bond-It
- Manufactuer: Bond-It
- Box Size: 5
Steri-Grout is a specially formulated, polymer modified cement based floor and wall tile grout. Recommended for sanitary installations ie. kitchens, bathrooms, toilets and shower rooms. Containing a strong fungicide it will also inhibit black spot mould growth.
For application guns for this product, please click here. For all other Bond-it products on our website, please click here.
For any further information you may need on Bond-it, please visit their website here.
STERI-GROUT is suitable for use in areas of limited movement/ vibration, so ideal for use over timber ply-boards and heated subfloors. Recommended for sanitary installations, i.e. kitchens, bathrooms, power showers, toilets and shower rooms. This grout has excellent adhesion characteristics to porcelain and fully vitrified tiles, has low permeability and reduced dirt pick up. Containing a strong fungicide, it will also inhibit black spot mould growth. Can be used in interior and exterior locations.
APPLICATION
Preparation
Check that all the tiles are securely fixed and that the tile adhesive has thoroughly dried before applying any load or pressure to the tiled surface. Allow adhesive to set sufficiently before applying grout. Ensure joints are clean, dry and free from dust and obstructions. Use only in joints from 1mm-20mm wide. It is recommended that current best practice, e.g. current TTA or COP guidelines, are always followed.
Mixing
STERI-GROUT powder should be added to clean water. Mix the powder with clean water (approx. 750ml: 3Kg bag) to a thick, creamy paste by either hand or slow speed mixing drill and paddle. When mixing by hand, allow the mixed grout to stand for a few minutes, then remix to ensure an even consistency. Do not mix more than can be used in a 30-60 minute period. Part used grout should never be “freshened up” by adding more water. Discard any grout once it appears to lose workability.
Application
Using a grouting tool, sponge or squeegee, work the mixed grout thoroughly into dry tile joints ensuring the joints are completely filled. Remove excess grout from the face of tiles with a damp sponge or cloth. Use a suitable tool to compact the grout into joints. After initial hardening of the grout, clean the tile surface using a clean, dampened sponge working diagonally across the grout lines. Once the grout is set, polish the tiles with a soft cloth. Protect from damp for 24 hours after grouting. Clean tools after use with warm water. Mechanical means may be necessary when product has set.
Open Time
Open time of the exposed adhesive bed is approx. 20 minutes, depending on conditions. Pot life approx. 30-60 minutes @ 20o C.
Drying Time
Final set will occur between 12-24 hours. Cement based products will take longer to harden and set at lower temperatures and should not be used below 5o C. Lightfoot traffic: after 12 hours; Full traffic: after 24-48 hours (dependant on site conditions).
LIMITATIONS
Slight colour variation may occur between batches. Colour variation will occur under different mixing and/or site conditions. Any cement film should be removed as soon as possible with an acid based cleaner. Always pre-wet joints when using an acid based cleaner. When grouting textured and slip-resistant tiles, ensure grout residue is thoroughly cleaned off before it has set. Please note: Certain tiles may suffer from discolouration or scratching when using grouts. We would recommend that a test application be carried out prior to grouting. Our grouts go through stringent checks to ensure quality and colour. However, we suggest a trial area to ensure colour is consistent and as expected due to the use of raw materials.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.