illbruck CT468 High Performance Contact Adhesive 1 Litre – Box of 12
£156.97 inc. VAT
£130.81 ex. VAT
- Product ID: 350859BOX
- Suitable For: bonding laminated products
- Area of use: INT & EXT
- Time to full cure: 30 minutes
- Volume: 1 LTR
- Container Type: tin
- Type: adhesive
- Colour: off white/pale yellow
- Brand: Illbruck
- Manufactuer: Illbruck
- Box Size: 12
illbruck CT468 is a high-performance contact adhesive with good heat resistance. illbruck CT468 offers excellent adhesion to non-porous surfaces. Although primarily developed for bonding laminated plastics, it is equally suitable for unplasticized or low plasticizer content PVC and ABS sheeting, aluminium, steel, rubber and asbestos cement sheeting.
– High-performance contact adhesive with high bond strength and good heat resistance
– Cured adhesive will withstand temperatures up to +70°C (14 days after bonding)
– Fully developed bond is completely resistant to water, mild acids and alkalis
– Dried bond line does not support combustion
– Very good specific adhesion to non-porous substrates
For all other illbruck products on our website, please click here. For more in our range of adhesives, please click here.
For any further information you may need on illbruck, please visit their website here.
illbruck CT468 offers excellent adhesion to non-porous surfaces. Although primarily developed for bonding laminated plastics, it is equally suitable for unplasticized or low plasticizer content PVC and ABS sheeting, aluminium, steel, rubber and asbestos cement sheeting.
APPLICATION
– Stir the adhesive thoroughly before use. For ease of application, maintain at a temperature between +15C and +24C
– Apply the adhesive using a spreader or similar serrated trowel with notches 1mm deep at 1.5mm centres. For edging and other small areas, brush application is recommended.
– Allow the solvents to evaporate until the adhesive is dry to the touch. This may take 10 – 20 minutes depending on porosity of the materials, ambient temperatures, humidity and the thickness of the deposited adhesive.
– When bonding two non-porous surfaces, ensure that all solvents have evaporated before bonding.
CLEANING
Clean tools and equipment using illbruck AT200 High Strength Cleaner.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
£133.94 inc. VAT
£111.62 ex. VAT -
From: £84.82 inc. VAT
£70.68 ex. VAT -
-
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.