Mapei Mapegrip D1 – Various Sizes
- Suitable For: bonding to all types of ceramic and mosaic tiles, on interior walls.
- Area of use: INT
- Application Method: trowel
- Volume: 2.5KG, 7.5KG, 15KG
- Container Type: tub
- Type: adhesive
- Colour: light beige
- Brand: Mapei
- Manufactuer: Mapei
- Box Size: 1
Mapegrip D1 is a ready mixed adhesive paste for internal wall tiling for most ceramic tiles and mosaics. It has a non-slip quality with high initial grab, and an extended open time. Suitable for domestic kitchens, bathrooms and showers. Not suitable for commercial use.
CHARACTERISTICS
Mapegrip D1 is an adhesive in water dispersion on synthetic resins, selective graded minerals and various additives. Mapegrip D1 is a ready-to-use paste that is easily applied with a trowell, with good high initial grab.
It’s thixotropic properties make it perfect for installing wall tiles without slippage. Once set, Mapegrip D1 has a strong high bond, and is sufficiently deformable for moderate vibration and deformation of building materials.
For more information about Mapei and their products, please visit their website here.
For our full Mapei range, click here. For more in our range of Grouts, click here.
Please be aware that this is a non stock item and lead times may vary.
Mapegrip D1 is suitable for bonding to all types of ceramic and mosaic tiles, on interior walls.
Application examples
In the installation of ceramic/mosaic tiles on:
• Gypsum plaster/gypsum block walls
• Gypsum backerboard
• Cement-based renders/cured concrete walls
• Tile backer boards
APPLICATION
Mapegrip D1 can be applied on surfaces which are sound, stable and free of dirt. Mapegrip D1 should be applied with a notched trowel. The notch size must transfer at least 65%:
• Mosaic tiles up to 5×5 cm – use MAPEI no. 4 square-notched trowel
• Regular size ceramic tiles – use MAPEI no. 5 notched trowel.
The working is approximately 2mins in normal conditions. Tiles must be set within that time and the adhesive must be spread correctly. If a surface skin forms, it must be reapplied.
Installing the tiles
Press firmly using a twist and slide motion to ensure an even transfer of the adhesive. Any adjustments must be done within 30mins.
Grouting
At normal temperatures, the joints can be grouted after 12 hours of setting. Larger tiles will take longer.
The joints can be grouted with Keracolor Fine Grain or Large Grain, depending on the joint width, or with Ultracolor.
If you require a good resistance to chemical agents, use Kerapoxy, a two-component anti-resisting epoxy grout.
For sealing flexible expansion joints, use Mapesil AC single-component silicone sealant.
LIMITATIONS
• For internal application only
• Not suitable for application in areas where immersion in water will occur (swimming pools, fountains, etc.)
• Tiles or substrates must be absorbent
• Do not use to install natural stone. E.g. Carrara marble
• Do not use on metal surfaces
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.