Protecta FR Damper
- Suitable For: fire proof ventilation ducts which penetrate fire rated constructions
- Area of use: INT & EXT
- Type: damper
- Colour: red
- Brand: Protecta
- Manufactuer: Polyseam
Protecta FR Damper is used to fireproof ventilation ducts that penetrate fire rated constructions such as fire compartments and firewalls, preventing the passage of fire and smoke (surrounding and inside the ventilation duct). The product consists of a steel casing and contains horizontal steel blades, treated with a technically advanced heat expanding graphite which closes off the whole damper in a fire.
The aperture surrounding the dampers are fire sealed with Protecta fire stopping products. The damper can be installed in the fire seal and the ventilation ducting attached, or the damper can be connected to the ducting and then fire sealed. The aperture where the ducts pass through can include one or multiple ventilation ducts. One can also pass through other technical services such as cables, cable trays and pipes within the same aperture.
For all our other fire and heat resistant sealants, click here.
We stock the full Protecta range on our website which you can shop here.
For all further information, please visit the Protecta website
– Maintenance free and no electrical connections necessary.
– The same damper can be installed in drywalls, masonry and concrete walls, timber walls, concrete floors and timber floors.
– An aperture can include several dampers and, in addition, technical services such as cables, cable trays and pipes.
– The product seals against penetration of fire and smoke, surrounding and inside the ventilation duct.
– Closes in the area where the fire is located (but not elsewhere), allowing the ventilation system to extract smoke from areas that are not on fire.
– Keeps the duct network’s temperature lower than 120°C, protecting fans and sensitive units in the system.
– Insulation of ducts is not necessary.
– Service life of more than 50 years; the damper will last the same life cycle as the ventilation system.
– The dampers are designed to fit standard ducting equipment, enabling the ducting system installer to fit the dampers easily.
– The dampers are attached to the inside of the ducts, giving the benefit of space saving.
– The dampers are only 15 cm long, and bends can be connected right behind the fire seal (also available to order in other sizes).
– The damper can be attached to a vent on one side
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
From: £138.22 inc. VAT
£115.18 ex. VAT -
-
-
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.