Protecta FR Foam 750ml Gun – Box of 12
£139.10 inc. VAT
£115.92 ex. VAT
- Product ID: P166BOX
- Suitable For: Filling free spaces, cracks, gaps and pipe penetrations
- Area of use: INT & EXT
- Time to full cure: 24 HOURS
- Volume: 750ml
- Container Type: tin
- Type: foam
- Colour: grey
- Brand: protecta
- Manufactuer: polyseam
- Box Size: 12
Protecta FR Foam is a fire classified construction foam that has excellent acoustic properties.
The foam satisfies the fire resistance requirement of 240 minutes at a depth of 20 cm and is suited for quick and inexpensive sealing between concrete elements, Leca and similar where the top finish is not required.
The sound resistance classification of the FR Foam is 58dB at a depth of 10 cm, which may solve some construction industry problems.
If you are looking for handheld FR foam please see the handheld B2 fire foam.
We stock the full Protecta range on our website.
For all further information, please visit the Protecta website
-Great for sealing window and door fittings
-Filling free spaces, cracks, gaps and pipe penetrations
-Sealing roof, wall and floor joints.
-Thermal insulation
-Acoustic insulation
APPLICATION
1. The foam is hazardous and the propellant is extremely flammable. Please read the Safety Data Sheet and use the recommended protective measurements for transport, storage and use of this product.
2. Remove all loose debris in the seal, any contaminants such as grease and oil from the surfaces to be sealed.
3. Moisture is necessary to ensure a fast and even curing of the foam. Spray surfaces with water to moisten them when foam is applied (a spray bottle for plants can be used). This is especially important in warm and dry areas.
4. The tin must be shaken well (approx. 15-20 times) before use. Attach the gun to the tin but do not overtighten or activate the release valve.
5. The tin should be turned upside down for foam application so that the gun is under the tin.
6. Depending on the joint orientation and size, best results will be obtained by building up multiple layers from the bottom, thus allowing each individual layer to part cure. Do not attempt to insert excessive wet foam, as rapid expansion will cause wasteful overspill of curing foam in the joint and may apply pressure to soft materials and push them out of position. Foam extrusion can be controlled by depressing the trigger on the gun more or less, reducing the pressure on the valve.
7. Once the gap or joint is completely filled, excessive overspill should be removed by cutting with a knife or similar.
8. After sealing, the foam should be covered by a substrate resistant to mechanical damage and UV-radiation.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.