- Suitable For: fire sealing
- Area of use: INT & EXT
- Application Method: silicone gun
- Volume: 380ml
- Container Type: cartridge
- Type: sealant
- Colour: 2 colours
- Brand: ARBO
- Manufactuer: ARBO
- Box Size: 25
ARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material.
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For application guns to use with this product, please click here.
ARBO Arbosil 1070 is suitable for:
• Sealing the perimeters of fire doors and screens.
• Exceptional fire resistance with high movement capability, ensuring 4 hours of fire integrity.
• Utilizing fire-retardant glazing in combination with Arboseal intumescent tape.
APPLICATION
Step 1 – Surface Preparation: Ensure that the surfaces are clean, dry, in good condition, and free from any contaminants. Note that the presence of soap or residue can hinder the adhesion of the silicone.
Step 2 – Surface Readiness: For gaps measuring 6mm or wider, insert a closed-cell Polyethylene foam backer rod, ideally 25% larger than the gap to allow for a minimum seal depth of 10mm. If needed, use masking tape around the perimeter to facilitate easy removal of excess silicone after application.
Step 3 – Loading the Caulking Gun: Insert the ARBO 1070 sealant cartridge into the skeleton gun. Use a sharp blade to snip the nozzle at a 45-degree angle, ensuring a clean cut without ragged edges. Avoid cutting the nozzle too large, as this can lead to difficulty and messiness during application.
Step 4 – Applying the Sealant: Squeeze the gun trigger to produce a smooth, even bead of silicone. Adjust your application speed to ensure a uniform bead. Be mindful not to use excessive silicone, as it will naturally spread when smoothed.
Step 6 – Smoothing and Final Touches: Dampen the silicone smoothers and tools to achieve the desired shape, correcting any mistakes made during the initial application. This is also the time to remove any masking tape used.
LIMITATIONS
• Cannot be overpainted.
• Not suitable for use on laminated glass.
• Not suitable for use on natural stone.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.