CLEARANCE – MAPESIL AC
8 Available
- Suitable For: Kitchen, Bathroom, Etc
- Area of use: INT
- Application Method: Sealant Gun
- Time to full cure: 24 hours
- Volume: 310ml
- Container Type: Cartridge
- Type: Silicone
- Brand: Mapei
- Manufactuer: Mapei
- Box Size: 1
MAPESIL AC is a high quality, mould resistant sealant, which is ideal for internal use but can also be used in external applications. The product comes in a 310ml cartridge & has a range of 42 colours to choose from. Mapei also colour match this product to their Ultracolor plus grout range, creating a seamless transition between grout & silicone lines when used together.
To view the Ultracolor plus range – please click here.
RECOMMENDATIONS
– Mapesil AC should not be used in applications between joints of ceramic tiles & natural stone of light colour externally. Use Mapesil LM, which can be viewed here.
– Should not be used for sealing of surfaces sensitive to acids, such as limestone. Again, use Mapesil LM.
– Do not use on bituminous surfaces or highly plasticized material.
– Mapesil AC’s chemical resistance to agents is typically excellent. However, we advise you to check the technical data sheet or do a small test.
We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.
For further information, please visit the Mapei website here.
– Perfect for sealing sanitary areas
– Kitchens
– Bathrooms
– Internal Application
– Ideal for use with ceramics
– Can be used on wooden frames
– Can also be used for Expansion Joints
APPLICATION
All areas needing application must be solid, free from dust and loose particles, oils, grease, wax, old paint and rust. To guarantee the seal can carry out its function, provision should be made for it to compress freely.
During application, it is, therefore, necessary that:
– Mapei AC only adheres to the side of the walls of the joint and not to be used at the base of the joint;
– The estimated maximum extension should be no higher than 25% of the initial width (calculated at +20°C). The joint should be sized with this in mind
– Joint width and depth must follow as below:
10mm Width = 10mm Depth
11mm – 20mm Width = 10mm Depth
20mm or above Width = Half of the width in depth.
With the Mapesil AC, cut the cartridge at the end of the thread and screw supplied nozzle on. Ensure the nozzle is cut at an angle and dimension to the corresponding joint. Insert the cartridge into the gun and expel the sealant.
1 review for CLEARANCE – MAPESIL AC
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related products
-
£237.95 inc. VAT
£198.29 ex. VATSika Sikaflex -117 Metal Force is a 1-part construction adhesive especially formulated for bonding metals. KET FEATURES Good adhesion to many metals and alloys such as copper, brass and bronze. Saving time and money without the need for a primer. Very good workability making it easier to use. Very high stability and weatherability on metals including copper, ensuring a durable product. Very low emissions keeping the user safe. Low extrusion force needed making it easier and quicker to use. Shelf Life: 12 months from the date of production. The product must -
£9.49 inc. VAT
£7.91 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
From: £5.66 inc. VAT
£4.72 ex. VATEverbuild Showerproof Bathroom Silicone is a mid-modulus sanitary & shower silicone sealant that adheres to most smooth and non-porous materials. Contains a powerful anti-fungal compound to protect the sealant against the growth of bacteria, mildew and black mould. Therefore, it is ideal in commonly found in areas of high humidity. Everbuild Showerproof & Bathroom Sealant forms a permanently flexible rubber seal. It is perfect for sanitary & bathroom applications, such as around baths, showers and basins. It can also be used for sealing around worktops & laminates in -
From: £6.55 inc. VAT
£5.46 ex. VATEverbuild Fire Seal 400 is an elastic, acoustic rated silicone sealant that neutrally cures & conforms to EN1366-4:2006 for fire retardant and has a fire rating of up to 4 hours in specific joint configurations. Typically used for all sealing joints within the building envelope which require a fire rating. Advantages - Everbuild Fire Seal 400is a Neutral cure – adheres to most building surfaces, porous and non-porous. - Permanently flexible (25% movement accommodation). - Excellent weathering properties – suitable for internal and external applications. - This product wi
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Lynda Schama (verified owner) –
Excellent service