Everbuild Fix and Fill Expanding Foam
- Suitable For: Filling gaps around pipes, framework, electrical chasing and irregular brickwork, as well as fixing and insulating.
- Area of use: INT & EXT
- Volume: 500ml, 750ml
- Container Type: can
- Type: foam
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
Everbuild Fix and Fill Foam is a one-part polyurethane foam in an aerosol form that is quick-setting. Everbuild Fix and Fill is supplied with attachable nozzles. The foam expands on application up to 150% its original volume.
Advantages
– Quick setting
– Fills broad gaps
– Possesses insulating and sound deadening properties.
For application tools, please click here, or for all other Everbuild products on our website, please click here.
If you require any further information on Everbuild products, please visit their website here.
Filling
– Gaps around pipe entries through walls
– Gaps around window frames, door frames
– Electrical wire chasing before plastering
Fixing
– Door frames
– Timber structures
– Window sills and thresholds
– Window frames
Insulating
– Behind cladding to exterior walls
– Behind soffit and barge boards
APPLICATION
APPLICATION METHOD / TOOLS
ALWAYS WEAR PROTECTIVE GLOVES.
Shake can well before use. Carefully fix nozzle. Do not overtighten.
Please note:
– When transported in cars, keep upright and secured in out of direct sunlight.
– Grease skin with body lotion or similar.
IMPORTANT – Re-use is only possible by cleaning the nozzle and valve tip with Everbuild FOAM CLEANER before the foam has cured.
LIMITATIONS
– Do not the over-pressurise container.
– Always apply above 5°C, ideally 20°C (conditions and product).
– Clean spills immediately with Everbuild FOAM CLEANER.
– When using EVERBUILD FIX & FILL Expanding Foam, always remove the nozzle from the can and clean quickly after use with Everbuild FOAM CLEANER.
Once cured, the dry foam must be removed mechanically or use FOAM EATER (always cut back and use on residues). No solvent will remove the product.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
-
From: £36.00 inc. VAT
£30.00 ex. VAT -
From: £61.68 inc. VAT
£51.40 ex. VAT
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.