Protecta Waterproofer 3 Litres
£79.30 inc. VAT
£66.08 ex. VAT
- Product ID: P303
- Suitable For: Protecting surfaces by making them water repellent. Will also protect other porous substrates such as stone, brickwork and concrete in facades.
- Area of use: preferably EXT
- Volume: 3LTR
- Container Type: pail
- Type: waterproofer
- Colour: milky white
- Brand: Protecta
- Manufactuer: Polyseam
- Box Size: 1
Protecta Waterproofer is a high viscosity cream-like impregnating fluid based on alkyl-alkoxy-silanes. When applied to cured Protecta® EX Mortar, the Waterproofer protects the surface by making it water repellent. The Waterproofer will also protect other porous substrates such as stone, brickwork and concrete in facades.
Protecta Waterproofer also provides a comprehensive protection against efflorescence and decomposition caused by water-soluble pollutants, frost damage and attack by moulds and bacteria on damp substrates. The construction material’s physical properties, especially its water vapour permeability (Sd-value) is barely affected by application of Protecta Waterproofer.
– Long-lasting and reliable
– Simple, drip-free application with excellent workability
– Water and VOC-free
– High concentration of active ingredients
– Alkaline stable
– Does not build up a film
– Extraordinary penetration depth
– Can be applied without any loss, in one layer and without sag
– Causes no discoloration or intensification of masonry surfaces
For all our other fire and heat coatings, please click here.
We stock the full Protecta range on our website.
For all further information, please visit the Protecta website
Protecta Waterproofer can be used on many building materials, including:
– Protecta EX Mortar and other mortars
– Plaster
– Porous concrete and concrete (perfectly suited for concrete repair)
– Limestone and natural stone
– Industrial made bricks and clinker
APPLICATION
Prepare
Before application, ensure the surface to be treated is clean, dry and free from grease, dirt, dust, and other contaminants. Remove all existing paints and coatings until you have a sound surface. If a stirrer is used, ensure it is cleaned thoroughly.
Apply
Ensure good ventilation. The product can be applied with a roller or brush. Apply 200 g/m2 in one layer for sufficient protection on most surfaces, but not more than 400 g/m2.
Please note, this is guidance only and not specific, as the absorption behaviour of substrates can be very different. It is recommended to test smaller areas to determine the actual needed amount. The active ingredient penetrates the substrate from 30 minutes to several hours, depending on the porosity of the substrate. The milky-white cream colour usually disappears without any residues and without a colour intensifying effect, provided that the treated surface has a minimum level of absorption capability. If in doubt, it is recommended to test smaller areas first.
LIMITATIONS
Protecta Waterproofer is not suited to be applied on substrates that provide no, or very low absorption capacity, such as:
– Belgian hard stone (Arduin)
– Dense or polished marble
– Granite
– Similar substrates
Protecta Waterproofer is not suited for submerged usage, and should not be in contact with bitumen or bitumen-like materials, synthetic resins or acrylate-based coatings (e.g. concrete paints). Please avoid applying over coatings and insulating materials as damage may occur. In case of contact, please remove the product immediately with plenty of cold water.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.