Everbuild Gun Grade Expanding Foam 750ml
£5.71 inc. VAT
£4.76 ex. VAT
Out of Stock
- Product ID: 484707
- Suitable For: Filling gaps around pipes, framework, electrical chasing and irregular brickwork, as well as fixing and insulating.
- Area of use: INT & EXT
- Volume: 750ml
- Container Type: can
- Type: foam
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
Everbuild Gun Grade Expanding Foam is a quick setting polyurethane based foam which expands greatly on application and yields up to 50 times original can contents. Can be cut, sawn, plastered and sealed over after approximately one hour. Fills irregular gaps, fixes framework, insulates and sound deadens. Designed for professional use in conjunction with Gun Foam Applicators.
Advantages
– Quick setting – can be cut, sawn or plastered in 1 hour.
– Economical in use – expands up to 50 times its original volume.
– Fills irregular and broad gaps where most conventional fillers would fail.
– Possesses insulating and sound deadening properties.
For all other expanding foams on our website, please click here.
For any further information you may need on Everbuild products, please visit their website here.
Filling
– Gaps around pipe entries through walls.
– Gaps around window frames, door frames.
– Electrical wire chasing before plastering
– Deep joints before applying sealant or plaster
– Irregular gaps in stone, brick, concrete or plaster
Fixing
– Door frames
– Timber structures
– Window sills and thresholds.
– Window frames
Insulating
– Behind cladding to exterior walls.
– Behind soffit and barge boards
APPLICATION
SUBSTRATE PREPARATION
Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be sealed with water. This assists in the curing process.
APPLICATION METHOD / TOOLS
ALWAYS WEAR PROTECTIVE GLOVES.
Shake can well before use (about 20 times). Carefully fix nozzle. Do not overtighten or force.
ALWAYS USE CAN UPSIDE DOWN.
For EVERBUILD Gun Grade Expanding Foam, tighten securely into one of our range of guns. Only partially fill cavities as the foam will expand to fill the remaining space. Any excess foam can be removed while still wet with Everbuild Foam Cleaner. Cured foam must be removed mechanically. When used for fixing door frames, supports must be used until the foam is fully cured.
Please note:
When transported in cars, keep in the boot, out of direct sunlight. When removing cured foam from the skin, take care not to damage with abrasives.
IMPORTANT – Re-use is only possible by cleaning the nozzle and valve tip with Everbuild Foam Cleaner before the foam has cured. Do not push any object into the valve as the contents may explode.
LIMITATIONS
– Carefully read instructions and text in warning box before use.
– Do not the over-pressurise container.
– Always apply above 5°C.
– Clean spills immediately with Everbuild Foam Cleaner.
– When using EVERBUILD Gun Grade Expanding Foam, always clean the gun thoroughly with Everbuild Foam Cleaner until the jet is clear of foam.
– Leave the canister attached until the gun is to be used again
– When applying, always remove the nozzle from the can and clean immediately after use with Everbuild Foam Cleaner
– For fire rated joints, use Everbuild Firefoam B1 in conjunction with Everbuild Firemate intumescent sealant.
– Once cured, the dry foam must be removed mechanically. No solvent will remove the product.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
£10.70 inc. VAT
£8.92 ex. VATFireFoam B1 Hand Held is a quick-setting, fire-rated, one-part polyurethane foam. It expands on application to yield up to 50 times the can content and meets the extremely stringent requirements of the test criteria DIN 4102 Part 1 for Construction Materials; Class B1 and BS 476 Part 20. Once cured, FireFoam B1 can be cut, sawn or plastered over after only one hour. Advantages - A high degree of fire rating: slows down the passage of flames and smoke. - High-speed setting - can be sawn or plastered within 1 hour. - Expands up to 50 times in size - Fills irregular and vast voids, -
£5.71 inc. VAT
£4.76 ex. VATEverbuild Gun Grade Expanding Foam is a quick setting polyurethane based foam which expands greatly on application and yields up to 50 times original can contents. Can be cut, sawn, plastered and sealed over after approximately one hour. Fills irregular gaps, fixes framework, insulates and sound deadens. Designed for professional use in conjunction with Gun Foam Applicators. Advantages - Quick setting - can be cut, sawn or plastered in 1 hour. - Economical in use - expands up to 50 times its original volume. - Fills irregular and broad gaps where most conventional fille -
£11.47 inc. VAT
£9.56 ex. VATEverbuild Thermofoam is formulated to be a flexible PU foam that absorbs component movements. Everbuild Thermofoam has a powerful bonding strength, that helps it give excellent thermal and acoustic insulation. It inhibits cracks from occurring during the contraction of building materials, such as wall to window bonds, providing a hermetically sealed barrier. Advantages - Adheres to all building surfaces, including concrete, brickwork, wood, plaster, plastic, stone, metal etc. - Temperature Resistant For all other fire protection on our website, please click
Reviews
There are no reviews yet.